Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 518

COPIER> FUNCTION> CST
MDK1-A4 Reg Multi Deck (Upper) A4 standard width
Lv.1 Details To register the standard value of A4 paper width (297 mm) on the
Multi Deck (Upper).
Make a fine adjustment by COPIER> ADJUST> CST-ADJ>
MDK1-A4.
Adj/set/operate method 1) Set A4 paper on the Multi Deck (Upper), and set the guide so that
it fits the paper width.
2) Select the item, and then press OK key.
The value is registered after automatic adjustment.
Caution After execution, check the registered value by COPIER> ADJUST>
CST-ADJ> MDK1-A4, and write it down on the service label.
Display/adj/set range 0 to 255
Related service mode COPIER> ADJUST> CST-ADJ> MDK1-A4
MDK1-A5R Reg Multi Deck (Upper) A5R stdrd width
Lv.1 Details To register the standard value of A5R paper width (148.5 mm) on the
Multi Deck (Upper).
Make a fine adjustment by COPIER> ADJUST> CST-ADJ> MDK1-
A5R.
Adj/set/operate method 1) Set A5R paper on the Multi Deck (Upper), and set the guide so
that it fits the paper width.
2) Select the item, and then press OK key.
The value is registered after automatic adjustment.
Caution After execution, check the registered value by COPIER> ADJUST>
CST-ADJ> MDK1-A5R, and write it down on the service label.
Display/adj/set range 0 to 255
Related service mode COPIER> ADJUST> CST-ADJ> MDK1-A5R
MDK2-A4 Reg Multi Deck (Middle) A4 stdrd width
5
Lv.1 Details To register the standard value of A4 paper width (297 mm) on the
Multi Deck (Middle).
Make a fine adjustment by COPIER> ADJUST> CST-ADJ>
MDK2-A4.
Adj/set/operate method 1) Set A4 paper on the Multi Deck (Middle), and set the guide so that
it fits the paper width.
2) Select the item, and then press OK key.
The value is registered after automatic adjustment.
Caution After execution, check the registered value by COPIER> ADJUST>
CST-ADJ> MDK2-A4, and write it down on the service label.
Display/adj/set range 0 to 255
Related service mode COPIER> ADJUST> CST-ADJ> MDK2-A4
5-290
COPIER> FUNCTION> CST
MDK2-A5R Reg Multi Deck (Middle) A5R stdrd width
Lv.1 Details To register the standard value of A5R paper width (148.5 mm) on the
Multi Deck (Middle).
Make a fine adjustment by COPIER> ADJUST> CST-ADJ> MDK2-
A5R.
Adj/set/operate method 1) Set A5R paper on the Multi Deck (Middle), and set the guide so
that it fits the paper width.
2) Select the item, and then press OK key.
The value is registered after automatic adjustment.
Caution After execution, check the registered value by COPIER> ADJUST>
CST-ADJ> MDK2-A5R, and write it down on the service label.
Display/adj/set range 0 to 255
Related service mode COPIER> ADJUST> CST-ADJ> MDK2-A5R
MDK3-A4 Reg Multi Deck (Lower) A4 standard width
Lv.1 Details To register the standard value of A4 paper width (297 mm) on the
Multi Deck (Lower).
Make a fine adjustment by COPIER> ADJUST> CST-ADJ>
MDK3-A4.
Adj/set/operate method 1) Set A4 paper on the Multi Deck (Lower), and set the guide so that
it fits the paper width.
2) Select the item, and then press OK key.
The value is registered after automatic adjustment.
Caution After execution, check the registered value by COPIER> ADJUST>
CST-ADJ> MDK3-A4, and write it down on the service label.
Display/adj/set range 0 to 255
Related service mode COPIER> ADJUST> CST-ADJ> MDK3-A4
MDK3-A5R Reg Multi Deck (Lower) A5R stdrd width
Lv.1 Details To register the standard value of A5R paper width (148.5 mm) on the
Multi Deck (Lower).
Make a fine adjustment by COPIER> ADJUST> CST-ADJ> MDK3-
A5R.
Adj/set/operate method 1) Set A5R paper on the Multi Deck (Lower), and set the guide so
that it fits the paper width.
2) Select the item, and then press OK key.
The value is registered after automatic adjustment.
Caution After execution, check the registered value by COPIER> ADJUST>
CST-ADJ> MDK3-A5R, and write it down on the service label.
Display/adj/set range 0 to 255
Related service mode COPIER> ADJUST> CST-ADJ> MDK3-A5R
T-5-50