Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 564

COPIER> OPTION> DSPLY-SW
ANIM-SW Screen switch set from MEAP to warning
Lv.2 Details To set to enable/disable switching from MEAP screen to the error/
jam screen.
If disabling this mode, the screen will not be switched to the warning
screen in the case of an error/jam/alarm, and a message is appeared
on the MEAP screen indicating to contact the service person.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled (No display of warning screen)
Default value 0
Related service mode COPIER> OPTION> DSPLY-SW> MEAP-DSP
Supplement/memo If just disabling the switch with MEAP-DSP, the screen is switched to
the standard screen in the case of an error/jam/alarm. If disabling the
switch with ANIM-SW, the screen will not be switched to the standard
screen and a warning is appeared on MEAP screen.
UI-PRINT Display/hide of print job screen
Lv.2 Details To set whether to display or hide the print job screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
IMGC-ADJ Dis/hide of img adj item in user mode
Lv.1 Details To set whether to display or hide the item relating to image
adjustment in user mode.
5
When selecting display setting, detailed image adjustment procedure
will be displayed only for the duplicated paper specified with the
following settings: Preferences> Paper Settings> Set Paper Type
Management.
Use case As needed
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Related user mode Preferences> Paper Settings> Set Paper Type Management
UI-RSCAN Display/hide of remote scan screen
Lv.2 Details To set whether to display or hide the remote scan screen on the
Control Panel.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
5-336
COPIER> OPTION> DSPLY-SW
UI-EPRNT Display/hide of extended print screen
Lv.2 Details To set whether to display or hide the extended print screen (print
screen for print server).
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
UI-WEB Display/hide of Web browser screen
Lv.2 Details To set whether to display or hide the Web browser screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
UI-HOLD Display/hide of hold job screen
Lv.2 Details To set whether to display the hold job screen on the Control Panel.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
TNR-WARN ON/OFF of toner alarm message
Lv.1 Details To set whether to display the toner alarm message.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0 (other than USA), 1 (USA)
Related service mode COPIER> OPTION> DSPLY-SW> T-LW-LVL
RMT-CNSL ON/OFF of MEAP console screen
Lv.1 Details Selecting "1: ON" enables to obtain log for Function Composer on
console screen.
Use case When obtaining log for Function Composer
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0