Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 161

E Detailed Occurance Items
code code area
E602 -1600 -00 Title Hard disk failure
Description /APL_CDS is abnormal
of detection
Measures 1. Check a cable or power supply connector
2. If not recovery, Boot-up in safe mode, and use SST to
execute full-format and to re-install system (SYSTEM,
LANGUAGE, RUI); and then power cycle of main
power (Power OFF/ON)
3. If still not recovery, replace HDD and re-install system
based on judging HDD failure.
E602 -1601 -00 Title Hard disk failure
Description /APL_CDS is abnormal
of detection
Measures 1. Check a cable or power supply connector
2. If not recovery, Boot-up in safe mode, and use SST to
execute full-format and to re-install system (SYSTEM,
LANGUAGE, RUI); and then power cycle of main
power (Power OFF/ON)
3. If still not recovery, replace HDD and re-install system
based on judging HDD failure.
E602 -1602 -00 Title Hard disk failure
Description /APL_CDS is abnormal
of detection
Measures 1. Check a cable or power supply connector
2. If not recovery, Boot-up in safe mode, and use SST to
execute full-format and to re-install system (SYSTEM,
LANGUAGE, RUI); and then power cycle of main
power (Power OFF/ON)
3. If still not recovery, replace HDD and re-install system
based on judging HDD failure.
E602 -1603 -00 Title Hard disk failure
Description /APL_CDS is abnormal
of detection
Measures 1. Input applicable CHK-TYPE into a partition; and
execute HDD-CHECK (requires several minutes to
some dozens of minutes); and then power cycle
2. If not recovery, input applicable CHK-TYPE into a
partition; and execute HDD-CLEAR; and then power
cycle
Description E Detailed Occurance Items
code code area
E602 -1604 -00 Title Hard disk failure
Description /APL_CDS is abnormal
of detection
Measures 1. Check a cable or power supply connector
2. If not recovery, Boot-up in safe mode, and use SST to
3. If still not recovery, replace HDD and re-install system
E602 -1605 -00 Title Hard disk failure
Description /APL_CDS is abnormal
of detection
Measures 1. Input applicable CHK-TYPE into a partition; and
2. If not recovery, replace HDD and re-install system
E602 -1610 -00 Title Hard disk failure
Description /APL_CDS is abnormal
of detection
Measures This is an error due to data error or software bug.
1. Boot-up in safe mode, and use SST to execute full-
2. If not recovery, replace HDD and re-install system
E602 -1611 -00 Title Hard disk failure
Description /APL_CDS is abnormal
of detection
Measures This is an error that usually does not occur at Read/Write
level.
1. Check a cable or power supply connector
2. If not recovery, replace HDD and re-install system
E602 -1612 -00 Title Hard disk failure
Description /APL_CDS is abnormal
of detection
Measures This is an error due to data error or software bug.
1. Boot-up in safe mode, and use SST to execute full-
2. If not recovery, replace HDD and re-install system
Description
execute full-format and to re-install system (SYSTEM,
LANGUAGE, RUI); and then power cycle of main
power (Power OFF/ON)
based on judging HDD failure.
execute HDD-CLEAR; and then power cycle
based on judging HDD failure.
format and to re-install system (SYSTEM, LANGUAGE,
RUI); and then power cycle of main power (Power
OFF/ON)
based on judging HDD failure.
based on judging HDD failure.
format and to re-install system (SYSTEM, LANGUAGE,
RUI); and then power cycle of main power (Power
OFF/ON)
based on judging HDD failure.
3
3-135