Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 511

COPIER> FUNCTION> INSTALL
COM-LOG Disp connect error w/ Sales Co's server
Lv.1 Details To display error information when the connection with the sales
company's server failed.
Use case When using Embedded-RDS
Adj/set/operate method Display only
Caution Be sure to use E-RDS, RGW-PORT, COM-TEST, COM-LOG and
RGW-ADR as a set.
Display/adj/set range Year, date, time, error code, error detail information (maximum 128
characters)
Related service mode COPIER> FUNCTION> INSTALL> E-RDS, RGW-PORT, COM-TEST,
RGW-ADR
Supplement/memo Embedded-RDS: Function to send device information such as the
device counter, failure, and consumables to the sales company's
server via SOAP protocol
RGW-ADR URL setting of Sales Company's server
Lv.1 Details To set the URL of the sales company's server to be used for
Embedded-RDS.
Use case When using Embedded-RDS
Adj/set/operate method 1) Select the URL.
2) Enter the URL, and then press OK key.
3) Turn OFF/ON the main power switch.
Caution • Do not use Shift-JIS character strings.
• Be sure to use E-RDS, RGW-PORT, COM-TEST, COM-LOG and
RGW-ADR as a set.
Display/adj/set range URL
Default value https://a01.ugwdevice.net/ugw/agentif010
Related service mode COPIER> FUNCTION> INSTALL> E-RDS, RGW-PORT, COM-TEST,
COM-LOG
Supplement/memo Embedded-RDS: Function to send device information such as the
device counter, failure, and consumables to the sales company's
server via SOAP protocol
CNT-DATE Set counter send start date to SC server
Lv.1 Details To set the year, month, date, hour and minute to send counter
information to the sales company's server.
This is displayed only when the Embedded-RDS third-party extended
function is available.
Use case When the Embedded-RDS third-party expanded function is available
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range YYYYMMDDHHMM (12 digits)
YYYY: Year, MM: Month, DD: Date, HH: Hour, MM: Minute
Default value 000000000000
Supplement/memo Embedded-RDS: Function to send device information such as the
device counter, failure, and consumables to the sales company's
server via SOAP protocol
COPIER> FUNCTION> INSTALL
CNT-INTV Set counter send interval to SC server
Lv.1 Details To set the interval of sending counter information to the sales
company's server in a unit of one hour.
This is displayed only when the Embedded-RDS third-party extended
function is available.
Use case • When restarting the potential control after executing COPIER>
OPTION> IMG-FIX> PO-CNT.
• When D-max control conditions are changed
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 168 (= 1 week)
Unit 1 hour
Default value 24
Supplement/memo Embedded-RDS: Function to send device information such as the
device counter, failure, and consumables to the sales company's
server via SOAP protocol
INISET-4 All color Dev Ass'y initial instal mode
Lv.1 Details To automatically execute operation necessary for initial installation of
the Developing Assemblies of 4 colors (Y, M, C, Bk).
1. Patch light intensity correction
2. Background correction
3. Potential control
4. Idle rotation of the Developing Assembly
5. Initialization of the Toner Density Sensor
6. Initialization of the Patch Sensor
7. Counter reset of the Developing Assembly
After execution, the AINR-OFF setting automatically returns to "0:
OFF".
Use case • At installation
• When replacing the Developing Assemblies of all colors
Adj/set/operate method Select the item, and then press OK key.
Caution • Use this item only when replacing Developing Assemblies of 4
colors simultaneously.
• Execute this item after setting "AINR-OFF" to "1: ON".
Display/adj/set range During operation: xxx second (remaining time), At normal termination:
OK, At abnormal termination: NG
Required time 155 seconds
Related service mode COPIER> FUNCTION> INSTALL> INISET-Y, INISET-M, INISET-C,
INISET-K, AINR-OFF
5
5-283