COPIER> ADJUST> COLOR
HD-OFS-Y
Color balance adj of Y high dens area
Lv.2 Details
To adjust the color balance of the high density area of Y.
As the greater value is set, the image gets darker.
This setting is linked with Adjustment/ Maintenance> Adjust Image
Quality> Color Balance.
Use case
Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-8 to 8
Default value
0
Related user mode
Adjustment/Maintenance> Adjust Image Quality> Color Balance
HD-OFS-M
Color balance adj of M high dens area
Lv.2 Details
To adjust the color balance of the high density area of M.
As the greater value is set, the image gets darker.
This setting is linked with Adjustment/ Maintenance> Adjust Image
Quality> Color Balance.
Use case
Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-8 to 8
Default value
0
Related user mode
Adjustment/Maintenance> Adjust Image Quality> Color Balance
HD-OFS-C
Color balance adj of C high dens area
Lv.2 Details
To adjust the color balance of the high density area of C.
As the greater value is set, the image gets darker.
This setting is linked with Adjustment/ Maintenance> Adjust Image
Quality> Color Balance.
Use case
Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-8 to 8
Default value
0
Related user mode
Adjustment/Maintenance> Adjust Image Quality> Color Balance
COPIER> ADJUST> COLOR
HD-OFS-K
Color balance adj of Bk high dens area
Lv.2 Details
To adjust the color balance of the high density area of Bk.
As the greater value is set, the image gets darker.
This setting is linked with Adjustment/ Maintenance> Adjust Image
Quality> Color Balance.
Use case
Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-8 to 8
Default value
0
Related user mode
Adjustment/Maintenance> Adjust Image Quality> Color Balance
PL-OFS-Y
Clr blnce adj of Y low dens area:PDL
Lv.2 Details
To adjust the color balance of the low density area of Y at PDL print.
As the greater value is set, the image gets darker.
Use case
Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-8 to 8
Default value
0
PL-OFS-M
Clr blnce adj of M low dens area:PDL
Lv.2 Details
To adjust the color balance of the low density area of M at PDL print.
As the greater value is set, the image gets darker.
Use case
Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-8 to 8
Default value
0
PL-OFS-C
Clr blnce adj of C low dens area:PDL
Lv.2 Details
To adjust the color balance of the low density area of C at PDL print.
As the greater value is set, the image gets darker.
Use case
Do not use this when the machine is operating correctly.
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
-8 to 8
Default value
0
5
5-217