Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 131

E Detailed Occurance Items
code code area
E5F9 -8002 -05 Title Error in the saddle lead-in roller disengage motor
(Finisher-A1)
Description The saddle lead-in roller does not come off the saddle
of detection lead-in roller HP sensor when the saddle lead-in roller
disengage motor has been driven for 50 pulses.
Measures 1. The connector of the saddle lead-in roller HP sensor
(S222) or the saddle lead-in roller disengage motor
(M214) are disconnected.
2. The wiring of the saddle lead-in roller HP sensor/the
saddle lead-in roller disengage motor are faulty.
3. The saddle lead-in roller HP sensor is faulty.
4. The saddle lead-in roller disengage motor is faulty.
5. The saddle stitcher controller PCB is faulty.
6. The finisher controller PCB is faulty.
Description
T-3-11
3
3-105