Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 569

COPIER> OPTION> IMG-FIX
TMP-H3-1 Adj of heavy ppr 3 print temperature 1
Lv.2 Details To adjust the print temperature 1 for "Heavy 3".
Set a positive value when a fixing failure occurs.
In addition, use this mode when an image failure or deterioration of
gloss occurs.
Use 0 (initial value) in the normal operation.
Use case When a fixing failure, an image failure, or deterioration of gloss
occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -4 to 2
-4: -20 deg C, -3: -15 deg C, -2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1:
+5 deg C, 2: +10 deg C
Unit 5 deg C
Default value 0
TMP-H3-2 Heavy ppr3 ini rotn temp, print temp 2&3
Lv.2 Details To adjust the initial rotation temperature, print temperature 2 and 3
for "Heavy 3".
Set a positive value when a fixing failure occurs.
In addition, use this mode when an image failure or deterioration of
gloss occurs.
Use 0 (initial value) in the normal operation.
Use case When a fixing failure, an image failure, or deterioration of gloss
occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit 5 deg C
Default value 0
TMP-H4-1 Adj of heavy ppr 4 print temperature 1
Lv.2 Details To adjust the print temperature 1 for "Heavy 4".
Set a positive value when a fixing failure occurs.
In addition, use this mode when an image failure or deterioration of
gloss occurs.
Use 0 (initial value) in the normal operation.
Use case When a fixing failure, an image failure, or deterioration of gloss
occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -4 to 2
-4: -20 deg C, -3: -15 deg C, -2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1:
+5 deg C, 2: +10 deg C
Unit 5 deg C
Default value 0
COPIER> OPTION> IMG-FIX
TMP-H4-2 Heavy ppr4 ini rotn temp, print temp 2&3
Lv.2 Details To adjust the initial rotation temperature, print temperature 2 and 3
for "Heavy 4".
Set a positive value when a fixing failure occurs.
In addition, use this mode when an image failure or deterioration of
gloss occurs.
Use 0 (initial value) in the normal operation.
Use case When a fixing failure, an image failure, or deterioration of gloss
occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit 5 deg C
Default value 0
TMP-C1 Coat ppr1 ini rotn temp, print temp 1-3
Lv.2 Details To adjust the initial rotation temperature and print temperature 1 to 3
for "Coated 1" which paper weight is customized to 106 to 128g/m2.
Set a negative value when wrinkles occur.
In addition, use this mode when an image failure or deterioration of
gloss occurs.
Use 0 (initial value) in the normal operation.
Use case When wrinkles, an image failure, or deterioration of gloss occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit 5 deg C
Default value 0
TMP-C2 Coat ppr2 ini rotn temp, print temp 1-3
Lv.2 Details To adjust the initial rotation temperature, print temperature 1 to 3 for
"Coated 2".
Set a positive value when a fixing failure occurs.
In addition, use this mode when an image failure or deterioration of
gloss occurs.
Use 0 (initial value) in the normal operation.
Use case When a fixing failure, an image failure, or deterioration of gloss
occurs
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit 5 deg C
Default value 0
5
5-341