Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 636

CST7-U3 MDeck(Low) oversea special ppr category3
Lv.1 Details To set the overseas special paper category 3 used in the Multi Deck
(Lower).
Display/adj/set range 0 to 31
0: Do not use special papers, 1 to 21: Not used, 22: K-LGL, 23 to 28:
Not used, 29: A-LTR, 30: Not used, 31: G-LTR
Default value 0
5
5-408
COPIER> OPTION> CST
■ ACC
COIN
Lv.1 Details
Use case
Adj/set/operate method 1) Enter the setting value, and then press OK key.
Caution
T-5-74
Display/adj/set range
Default value
Related service mode
Related user mode
Supplement/memo
DK-P
Lv.1 Details
Display/adj/set range
Default value
COPIER> OPTION> ACC
Setting of charge management
To set charging management method.
At installation of Coin Manager
2) Turn OFF/ON the main power switch.
Following items are automatically specified when changing the value
to 3 (from 0 to 2). The change will not be returned even if changing
back the value to 0 to 2 (from 3) once the mode has been changed.
• COPIER> OPTION> USER> CONTROL=1
• COPIER> OPTION> FNC-SW> DA-CNCT=1
• COPIER> OPTION> DSPLY-SW> UI-BOX,UI-SEND,UI-
FAX=0
• Function Settings > Send > E-Mail/I-Fax Settings >
Communication Settings > SMTP Receive, POP=OFF
• Preferences> Network > TCP/IP Settings > DNS Settings >
FTP Print Settings > Use FTP Printing=OFF
• Preferences> Network > TCP/IP Settings > DNS Settings >
IPP Print Settings > Use IPP Printing=ON
0 to 7
0: No charge
1: Charge with Coin Manager
2 Charge with remote counter
3: Charge with DA (only in Japan)
4: Charge with this machine itself
5: Not used
6: External charge mode 6
7: External charge mode 7
0
COPIER> OPTION> USER> CONTROL
COPIER> OPTION> FNC-SW> DA-CNCT
COPIER> OPTION> DSPLY-SW> UI-BOX, UI-SEND, UI-FAX
Function Settings > Send > E-Mail/I-Fax Settings > Communication
Settings
Preferences> Network > TCP/IP Settings > DNS Settings > FTP
Print Settings
Preferences> Network > TCP/IP Settings > DNS Settings > IPP Print
Settings
Control card can be used with "0: No charge".
DA: Digital Accessory
Setting of Paper Deck paper size
To set the paper size used in the Paper Deck.
0 to 2
0: A4, 1: B5, 2: LTR
0