Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 117

E Detailed Occurance Items
code code area
E584 -8001 -05 Title A. Error in the stack delivery lower/shutter motor
(Finisher-A1)
B. Shutter home position error (Finisher-B1)
Description A. The shutter does not come off the shutter HP sensor
of detection when the stack delivery lower/shutter motor has been
driven for 3 seconds.
B. The shutter does not leave the shutter home position
when the stack ejection motor has been driven for 3
seconds.
Measures A:
B:
Description
A-1. The connector of the shutter HP sensor (S106)
or the stack delivery lower/shutter motor (M122)
are disconnected.
A-2. The wiring of the shutter HP sensor or the
stack delivery lower/shutter motor are faulty.
A-3. The shutter HP sensor is faulty.
A-4. The stack delivery lower/shutter motor is faulty.
A-5. The finisher controller PCB is faulty.
B-1. The shutter home position sensor (PI113) is
faulty.
B-2. The wiring between the finisher controller
PCB and stack ejection motor, and between the
finisher controller PCB and shutter clutch is faulty.
B-3. The shutter mechanism is faulty.
B-4. The stack ejection motor (M102)/the shutter
clutch (CL101)/the stack ejection lower roller
clutch (CL102) are faulty.
B-5. The finisher controller PCB is faulty.
E Detailed Occurance Items
code code area
E584 -8002 -05 Title A. Error in the stack delivery lower/shutter motor
(Finisher-A1)
B. Shutter home position error (Finisher-B1)
Description A. The shutter HP sensor does not detect the shutter
of detection when the stack delivery lower/shutter motor has been
driven for 3 seconds.
B. The shutter does not return to the shutter home
position when the stack ejection motor has been driven
for 3 seconds.
Measures A:
B:
E584 -8003 -05 Title Error in the stack delivery lower/shutter motor
(Finisher-A1)
Description The shutter does not come off the shutter close detection
of detection sensor when the stack delivery lower/shutter motor has
been driven for 3 seconds.
Measures 1. The connector of the shutter close detection sensor
(S148)/the stack delivery lower/shutter motor (M122)
are disconnected.
2. The wiring of the shutter close detection sensor / the
stack delivery lower/shutter motor are faulty.
3. The shutter close detection sensor is faulty.
4. The stack delivery lower/shutter motor is faulty.
5. The finisher controller PCB is faulty.
Description
A-1. The connector of the shutter HP sensor (S106)
or the stack delivery lower/shutter motor (M122)
are disconnected.
A-2. The wiring of the shutter HP sensor or the
stack delivery lower/shutter motor are faulty.
A-3. The shutter HP sensor is faulty.
A-4. The stack delivery lower/shutter motor is faulty.
A-5. The finisher controller PCB is faulty.
B-1. The shutter home position sensor (PI113) is
faulty.
B-2. The wiring between the finisher controller
PCB and stack ejection motor, and between the
finisher controller PCB and shutter clutch is faulty.
B-3. The shutter mechanism is faulty.
B-4. The stack ejection motor (M102)/the shutter
clutch (CL101)/the stack ejection lower roller
clutch (CL102) are faulty.
B-5. The finisher controller PCB is faulty.
3
3-91