Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 119

E Detailed Occurance Items
code code area
E590 -8003 -05 Title Error in the Punch motor (Finisher-A1)
Description The puncher does not come off the punch HP sensor
of detection when the punch motor has been driven for 0.2 second.
The puncher does not come off the punch HP sensor
during initialization.
Measures 1. The connector of the punch HP sensor (S104)/the
punch motor clock sensor (S105) are disconnected.
2. The connector of the punch motor (M102) is
disconnected.
3. The wiring of the punch HP sensor or the punch motor
clock sensor are faulty.
4. The wiring of the punch motor is faulty.
5. The punch HP sensor is faulty.
6. The punch motor clock sensor is faulty.
7. The punch motor is faulty.
8. The puncher driver PCB (PCB1) is faulty.
9. The finisher controller PCB is faulty.
E591 -8001 -05 Title Scrap full detection error (External 2 Hole Puncher)
Description The voltage of the light received is 3.0 V or less even
of detection when the light emitting duty of the scrap full detector
sensor has been increased to 66 % or more.
Measures 1. The wiring between the scrap full detector PCB and
punch controller PCB is faulty.
2. The scrap full detector PCB is faulty.
3. The punch controller PCB is faulty.
4. The finisher controller PCB is faulty.
E591 -8002 -05 Title Scrap full detection error (External 2 Hole Puncher)
Description The voltage of the light received is 2.0 V or more even
of detection when the light emitting duty of the scrap full detector
sensor has been decreased to 0 %.
Measures 1. The scrap full detector PCB is faulty.
2. The punch controller PCB is faulty.
3. The finisher controller PCB is faulty.
E592 -8001 -05 Title Trailing edge sensor error (External 2 Hole Puncher)
Description The voltage of the light received is 2.5 V or less even
of detection when the light emitting duty of the trailing edge sensor
(LED5, PTR5) has been increased to 66 % or more.
Measures 1. The wiring between the LED PCB/photosensor PCB
and punch controller PCB is faulty.
2. The LED PCB and photosensor PCB is faulty.
3. The punch controller PCB is faulty.
4. The finisher controller PCB is faulty.
Description E Detailed Occurance Items
code code area
E592 -8002 -05 Title Trailing edge sensor error (External 2 Hole Puncher)
Description The voltage of the light received is 2.0 V or more even
of detection when the light emitting duty of the trailing edge sensor
has been decreased to 0 %.
Measures 1. The LED PCB/photosensor PCB is faulty.
2. The punch controller PCB is faulty.
3. The finisher controller PCB is faulty.
E592 -8003 -05 Title Horizontal registration sensor 1 error (External 2 Hole
Puncher)
Description The voltage of the light received is 2.5 V or less even
of detection when the light emitting duty of the horizontal registration
sensor 1 (LED1, PTR1) has been increased to 66 % or
more.
Measures 1. The wiring between the LED PCB/photosensor PCB
and punch controller PCB is faulty.
2. The LED PCB/photosensor PCB is faulty.
3. The punch controller PCB is faulty.
4. The finisher controller PCB is faulty.
E592 -8004 -05 Title Horizontal registration sensor 1 error (External 2 Hole
Puncher)
Description The voltage of the light received is 2.0 V or more even
of detection when the light emitting duty of the horizontal registration
sensor 1 (LED1, PTR1) has been decreased to 0 %.
Measures 1. The LED PCB/photosensor PCB is faulty.
2. The punch controller PCB is faulty.
3. The finisher controller PCB is faulty.
E592 -8005 -05 Title Horizontal registration sensor 2 error (External 2 Hole
Puncher)
Description The voltage of the light received is 2.5 V or less even
of detection when the light emitting duty of the horizontal registration
sensor 2 (LED2, PTR2) has been increased to 66 % or
more.
Measures 1. The wiring between the LED PCB/photosensor PCB
and punch controller PCB is faulty.
2. The LED PCB/photosensor PCB is faulty.
3. The punch controller PCB is faulty.
4. The finisher controller PCB is faulty.
E592 -8006 -05 Title Horizontal registration sensor 2 error (External 2 Hole
Puncher)
Description The voltage of the light received is 2.0 V or more even
of detection when the light emitting duty of the horizontal registration
sensor 2 (LED2, PTR2) has been decreased to 0 %.
Measures 1. The LED PCB and photosensor PCB is faulty.
2. The punch controller PCB is faulty.
3. The finisher controller PCB is faulty.
Description
3
3-93