Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 632

■ CST
U1-NAME Dis/hide of ppr name in ppr size groupU1
Lv.2 Details To set whether to display or hide paper name at paper size group U1
detection.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
U2-NAME Dis/hide of ppr name in ppr size groupU2
Lv.2 Details To set whether to display or hide paper name at paper size group U2
detection.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
U3-NAME Dis/hide of ppr name in ppr size groupU3
Lv.2 Details To set whether to display or hide paper name at paper size group U3
detection.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
5
0: Hide, 1: Display
Default value 0
U4-NAME Dis/hide of ppr name in ppr size groupU4
Lv.2 Details To set whether to display or hide paper name at paper size group U4
detection.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
P-SZ-C1 Setting of Right Deck paper size
Lv.1 Details To set the paper size used in the Right Deck.
Use case Upon user's request
Caution Be sure to match with the hardware setting size.
Display/adj/set range 0 to 2
0: A4, 1: B5, 2: LTR
Default value 0
5-404
COPIER> OPTION> CST
COPIER> OPTION> CST
P-SZ-C2 Setting of Left Deck paper size
Lv.1 Details To set the paper size used in the Left Deck.
Use case Upon user's request
Caution Be sure to match with the hardware setting size.
Display/adj/set range 0 to 2
0: A4, 1: B5, 2: LTR
Default value 0
D1-CURL Set of curl correct at Right Deck pickup
Lv.1 Details To set the curl correction level for the sheets picked up from the
Right Deck.
As the value is incremented by 1, the curl correction level is
increased.
Regardless of face-up or face-down, increase the value in the case
of upward curl and decrease it in the case of downward curl.
When this setting is made, the same curl correction level is applied
to all media.
This setting is linked with the value specified to the Right Deck in
"Adjustment/Maintenance> Adjust Action> Correct Curl for Each
Paper Drawer" in user mode.
Display/adj/set range -10 to 10
Default value 0
Related user mode Adjustment/Maintenance> Adjust Action> Correct Curl for Each
Paper Drawer
D2-CURL Set of curl correct at Left Deck pickup
Lv.1 Details To set the curl correction level for the sheets picked up from the Left
Deck.
As the value is incremented by 1, the curl correction level is
increased.
Regardless of face-up or face-down, increase the value in the case
of upward curl and decrease it in the case of downward curl.
When this setting is made, the same curl correction level is applied
to all media.
This setting is linked with the value specified to the Left Deck in
"Adjustment/Maintenance> Adjust Action> Correct Curl for Each
Paper Drawer" in user mode.
Display/adj/set range -10 to 10
Default value 0
Related user mode Adjustment/Maintenance> Adjust Action> Correct Curl for Each
Paper Drawer