Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 116

E Detailed Occurance Items
code code area
E57B -8001 -05 Title
Description
of detection
Measures
E57B -8002 -05 Title
Description
of detection
3
Measures
E57C -8001 -05 Title
Description
of detection
Measures
3-90
Description
Error in the paper trailing edge pushing guide motor
(Finisher-A1)
The paper trailing edge pushing guide does not come off
the paper trailing edge pushing guide HP sensor when
the paper trailing edge pushing guide motor has been
driven for 3 seconds.
1. The connector of the paper trailing edge pushing guide
HP sensor (S113) or the paper trailing edge pushing
guide motor (M113) are disconnected.
2. The wiring of the paper trailing edge pushing guide HP
sensor or the paper trailing edge pushing guide motor
are faulty.
3. The paper trailing edge pushing guide HP sensor is
faulty.
4. The paper trailing edge pushing guide motor is faulty.
5. The finisher controller PCB is faulty.
Error in the paper trailing edge pushing guide motor
(Finisher-A1)
The paper trailing edge pushing guide HP sensor does
not detect the paper trailing edge pushing guide when the
paper trailing edge pushing guide motor has been driven
for 3 seconds.
1. The connector of the paper trailing edge pushing guide
HP sensor (S113) or the paper trailing edge pushing
guide motor (M113) are disconnected.
2. The wiring of the paper trailing edge pushing guide HP
sensor or the paper trailing edge pushing guide motor
are faulty.
3. The paper trailing edge pushing guide HP sensor is
faulty.
4. The paper trailing edge pushing guide motor is faulty.
5. The finisher controller PCB is faulty.
Error in the processing tray paper retainer motor
(Finisher-A1)
The paper retainer does not come off the paper retainer
HP sensor when the processing tray paper retainer motor
has been driven for 3 seconds.
1. The connector of the paper retainer HP sensor (S135)
or the processing tray paper retainer motor (M118) are
disconnected.
2. The wiring of the paper retainer HP sensor or the
processing tray paper retainer motor are faulty.
3. The paper retainer HP sensor is faulty.
4. The processing tray paper retainer motor is faulty.
5. The finisher controller PCB is faulty.
E Detailed Occurance Items
code code area
E57C -8002 -05 Title Error in the processing tray paper retainer motor
(Finisher-A1)
Description The paper retainer HP sensor does not detect the paper
of detection retainer when the processing tray paper retainer motor
has been driven for 3 seconds.
Measures 1. The connector of the paper retainer HP sensor (S135)
or the processing tray paper retainer motor (M118) are
disconnected.
2. The wiring of the paper retainer HP sensor or the
processing tray paper retainer motor are faulty.
3. The paper retainer HP sensor is faulty.
4. The processing tray paper retainer motor is faulty.
5. The finisher controller PCB is faulty.
E583 -8001 -05 Title Error in the tray auxiliary guide motor (Finisher-A1)
Description The tray auxiliary guide does not come off the tray
of detection auxiliary guide front/rear HP sensors when the tray
auxiliary guide motor has been driven for 3 seconds.
Measures 1. The connector of the tray auxiliary guide front HP
sensor (S137) or the tray auxiliary guide rear HP
sensor (S136) are disconnected.
2. The connector of the tray auxiliary guide motor (M120)
is disconnected.
3. The wiring of the tray auxiliary guide front HP sensor or
the tray auxiliary guide rear HP sensor are faulty.
4. The wiring of the tray auxiliary guide motor is faulty.
5. The tray auxiliary guide front HP sensor is faulty.
6. The tray auxiliary guide rear HP sensor is faulty.
7. The tray auxiliary guide motor is faulty.
8. The finisher controller PCB is faulty.
E583 -8002 -05 Title Error in the tray auxiliary guide motor (Finisher-A1)
Description The tray auxiliary guide front/rear HP sensors does nor
of detection detect the tray auxiliary guide when the tray auxiliary
guide motor has been driven for 3 seconds.
Measures 1. The connector of the tray auxiliary guide front HP
sensor (S137) or the tray auxiliary guide rear HP
sensor (S136) are disconnected.
2. The connector of the tray auxiliary guide motor (M120)
is disconnected.
3. The wiring of the tray auxiliary guide front HP sensor or
the tray auxiliary guide rear HP sensor are faulty.
4. The wiring of the tray auxiliary guide motor is faulty.
5. The tray auxiliary guide front HP sensor is faulty.
6. The tray auxiliary guide rear HP sensor is faulty.
7. The tray auxiliary guide motor is faulty.
8. The finisher controller PCB is faulty.
Description