Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 525

COPIER> FUNCTION> CLEAR
KEY-CLR Encrypt key clear of HDD Encrypt Board
Lv.2 Details To clear the encryption key of the HDD Encryption Board (Security
Kit) for replacement.
Processing is executed at the time of replacement of the encryption
board, and a new encryption key is generated.
Use case When replacing the encryption key for the HDD Encryption Board
Adj/set/operate method 1) Select the item, and then press OK key.
2) Check that OK is displayed.
3) Turn OFF/ON the main power switch.
Caution Since all data in the HDD becomes unavailable when executing this
item, be sure to initialize the HDD after turning OFF/ON the main
power switch.
Display/adj/set range At normal termination: OK, At abnormal termination: NG
USBM-CLR Initialize USB MEAP priority rgst info
Lv.1 Details To initialize the registered ID data retained in the OS field by calling
the API provided by the OS.
Use case When a failure occurs in USB MEAP priority registration
FX-L-CLR Clear of Fixing Motor current value
Lv.1 Details To reset the log of current value of the Fixing Motor.
Use case When resetting the current value due to any factor other than
replacement of the Pressure Belt (e.g. when recovering from failure
of the Fixing Motor or gear)
Adj/set/operate method Select the item, and then press OK key.
Related service mode COPIER> DISPLAY> FIXING> FX-MTR2 to 8
JV-CACHE Cache clear of JAVA application
Lv.1 Details To clear the cache information used by JAVA application.
Use case When initializing the JAVA application
Adj/set/operate method Select the item, and then press OK key.
FXTX-CLR Clearing fax job information
Lv.1 Details To clear fax job information stored on SRAM.
Use this mode to restore from E611-0001.
Use case When E611-0001 occurs
Adj/set/operate method Select the item, and then press OK key.
LANG-CLR Uninstallation of language files
Lv.2 Details To uninstall the language files other than English file.
When rebooting the machine after execution, language files other
than English file are deleted, and language displayed on the screen
becomes English.
Use case When uninstalling language files
Adj/set/operate method 1) Select the item, and then press OK key.
2) Reboot the machine.
■ MISC-R
SCANLAMP
Lv.1 Details
Use case
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range
Required time
1PSCLB-A
Lv.1 Details
Use case
Adj/set/operate method 1) Set paper on DADF.
Caution
Display/adj/set range
Related service mode
1PSCLB-B
Lv.1 Details
Use case
Adj/set/operate method 1) Set the document used by 1PSCLB-A on DADF, so that the front
Caution
Display/adj/set range
T-5-55
Related service mode
COPIER> FUNCTION> MISC-R
Light-up check of LED
To light up the LED for 3 seconds.
When replacing the LED
During operation: ACTIVE, When operation finished normally: OK!
3 seconds
DADF 2 faces color differ crrct (front)
To acquire scanning data on the front side in order to correct the
color difference between the front and back side at the time of duplex
stream reading.
A significant color difference may occur between the front and back
side of the image scanned on DADF caused by variations in the light
source of the lamp and changes in durability. Such a color difference
is corrected by executing 1PSCLB-B following 1PSCLB-A.
When a significant color difference occurs between the front and
back side caused by variations in the light source of the lamp and
changes in durability
2) Select the item, and then press OK key.
Be sure not to turn OFF/ON the power after OK is displayed by
1PSCLB-A.
During operation: ACTIVE, When operation finished normally: OK!
COPIER> FUNCTION> MISC-R> 1PSCLB-B, 1PCLBRST
DADF 2 faces color differ crrct (back)
To acquire scanning data on the back side in order to correct the
color difference between the front and back side at the time of duplex
stream reading.
A significant color difference may occur between the front and back
side of the image scanned on DADF caused by variations in the light
source of the lamp and changes in durability. Such a color difference
is corrected by executing 1PSCLB-B following 1PSCLB-A.
When a significant color difference occurs between the front and
back side caused by variations in the light source of the lamp and
changes in durability
side is faced down and the cyan image is placed at the left rear
side.
2) Select the item, and then press OK key.
Be sure not to turn OFF/ON the power after OK is displayed by
1PSCLB-A.
During operation: ACTIVE, When operation finished normally: OK!
COPIER> FUNCTION> MISC-R> 1PSCLB-A, 1PCLBRST
5
5-297