Table of Contents
Advertisement
1. Operating the Setting and Display Unit
1.1 Setting and display unit
(1) Setting and display unit appearance
An LCD display is used for the screen displays.
Operations such as screen transition and data setting are carried out with the NC keyboard.
The setting and display unit is configured of the LCD display, various keys and menu keys as shown
below.
The drawing below shows a horizontal layout of the LCD display and NC keyboard, but these can
also be arranged vertically.
4. Menu changeover keys
The following keys are provided on the keyboard.
1.
Function key
2.
Page
changeover
key
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1. Operating the Setting and Display Unit
READY LED
LCD display
13. Menu keys
Key type
Key
MONITOR
SETUP
EDIT
DIAGN
MAINTE
Previous page
key
Next page key
search engine
5. Data setting keys
(alphabet, numerals, symbols)
1. Function keys
6. Window operation keys
RESET
12. RESET key
2. Page changeover key 11. Cursor keys
Operation
This displays the menu of the screen related to
"operations". ( → Refer to "2. Monitor Screens".)
This displays the menu of the screen related to "setup".
( → Refer to "3. Setup Screens".)
This displays the menu of the screen related to "editing".
( → Refer to "4. Edit Screens".)
This displays the menu of the screen related to "diagnosis".
( → Refer to "5. Diagnosis Screens".)
This displays the menu of the screen related to
"maintenance". ( → Refer to "6. Maintenance Screens".)
When the displayed contents cover several pages, this
displays the contents of the previous page. The " " mark
at the top of the screen indicates that there is a previous
page.
When the displayed contents cover several pages, this
displays the contents of the next page. The " " mark at the
top of the screen indicates that there is a next page.
I – 1
3. Previous scree n display key
(System changeover)
8. Lower case input key
7. Data correction keys
9. SHIFT key
SHIFT
INPUT
CALC
11. INPUT key
Advertisement
Table of Contents
