Mitsubishi Electric MELDAS 600M Series Instruction Manual page 131

3.1.3 Copying/pasting the tool offset data
(1) Copying/pasting a line at the cursor position (one line amount)
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Move the cursor to the line to
be copied.
(Note) One of the following methods can be used to designate the line.
• Using the cursor movement keys
selected.
• Press
Offset No.
2)
Select line copy.
Menu
Line copy
The highlight of the copied line
returns to normal.
3)
Move the cursor to the line
(offset No.: 109) where the
data is to be pasted.
4)
Press the menu key
.
Line paste
(Note) If the copied line of data is changed after the menu key
changed data is written when pasted.
search engine
3. Setup Screens
and
↑ ↓
, set the offset No. in the setting area, and press the
One line of the copied data is highlighted.
Ofset No Length
100 0.000
101
0.000
102
56.000
103
0.000
104 0.000
105
0.000
106
-12345.000
The copied data is written in the line where the cursor is
at. The highlight of the copied line returns to normal.
The copied data is held until another line is copied.
Ofset No Length
0.000
107
0.000
108
56.000
109
0.000
110
0.000
111
0.000
112
-12345.000
113
I – 116
, move the cursor to the line to be
L wear Radius R wear
0.000 0.000
0.000
0.000
0.000
0.000
19.000 10.000
8.000
0.000
0.000
0.000
0.000 0.000
0.000
0.000 0.000
0.000
-123.000
-12345.000
-123.000
L wear Radius R wear
0.000
0.000
0.000
0.000
0.000 0.000
19.000
10.000
8.000
0.000
0.000 0.000
0.000
0.000
0.000
0.000
0.000 0.000
-123.000
-12345.000 -123.000
is pressed, the
Line copy
key.
INPUT