Mitsubishi Electric MELDAS 600M Series Instruction Manual page 250

4.1.2 Editing a program
(1) Operation method
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Press the menu key
Area change , and select the
usage area.
2)
Press the menu key
3)
Input the program No.
112
INPUT
When is pressed
Open
again, the process ends.
The program No. can be selected from a list.
Refer to "(2) Selecting a program from a list".
4)
Edit the machining program.
5)
Save the program.
Menu
Save file Y
(Note 1) An error occurs if a nonexisting program No. is set.
(Note 2) If the selected program is running, it can be displayed but not edited. Even if data is
set, an error occurs when the
(Note 3) When changing to the Edit screen after operation search, the searched program
becomes the edit program.
(Note 4) If the operation parameter "Program save type" is set to 1, the program is saved
each time the
menu.
File save
search engine
4. Edit Screens
The menu is highlighted, and the cursor appears at the
Open .
No. setting column.
The program is displays from the head. The cursor
moves to the head character of the program. The mode
enters the overwrite mode.
When the display is completed, the menu highlight
returns to normal.
Refer to "4.2 Editing operations".
The created machining program is saved in the NC
memory.
(Note 4)
The menu highlight returns to normal.
key is pressed, and the program is not saved.
INPUT
key is pressed. Thus, it is not necessary to press the
INPUT
I – 235