Changing A File Name (Rename) - Mitsubishi Electric MELDAS 600M Series Instruction Manual

3.3.5 Changing a file name (Rename)

This section explains the method of changing a file name.
Refer to "3.3.1 Selecting a device, directory and file" for the method of designating a device, directory and
file.
(1) Changing a file name
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Press the menu
, and select file
Area change
setting column A.
2)
Designate the original device,
directory and file name.
3)
Press the menu
, and select file
Area change
setting column B.
4)
Designate the new device,
directory and file name.
5)
Press the menu .
Rename A -> B .
6)
Press or .
Y INPUT
(Note 1) Make sure the original and new devices are the same.
(Note 2) If the file to be renamed is running, an error occurs, and the name is not changed.
(Note 3) If a file that does not exist is designated for the original file, or if an existing file name
is designated for the new file selection, an error occurs, and the name is not
changed.
search engine
3. Setup Screens
The designated original file name appears.
The designated new file name appears.
Renaming of the file starts.
A message appears when the renaming is completed.
I – 138