Mitsubishi Electric MELDAS 600M Series Instruction Manual page 78

Operation example 2
(Calculating the machining time to a random position in another program)
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
1)
Designate the start position.
Top search to position for
starting machining time
calculation.
→ Refer to step 1) of
"Operation example 1".
(Note 1) Refer to "2.5.2 Executing top search" for details on how to execute top search.
(Note 2) The other program refers to a subprogram, etc., called out during this machining.
If a program that is not called out in this machining is designated, the time is
calculated to the end of machining.
(Note 3) Always set the program No.
2)
Designate the end position
and its program No.
• Machining program
device, directory
• Program No., sequence
No., block No. (number of
executions to restart), etc.
(Note) Always set the program No.
3)
Press .
Time calcul
search engine
The selected device name, directory path and program
No., etc., appear in the setting column.
When the search is completed, the message "Top
search completed" appears.
The set numbers appear in the setting column.
The machining time calculation starts. When the
machining time is calculated, a message appears.
The calculation results appear in "Mach time" on the
screen.
The setting column contents are cleared.
Press the menu key
Calcul cancel
calculation process.
I – 63
to cancel the