Table of Contents
Advertisement
(2) Menus
command
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Menu
When the magazine pot No. to be displayed in the
setting area is set, and the
magazines are displayed with the set pot No. at the top
Pot No.
and in continuing order below.
The cursor moves to the data of the set pot No., and
the tool No. can be input.
This changes the spindle/standby tool No.
Spindle
The cursor moves to the head of the spindle/standby
standby
tool No.
Random values can be input in each data item of M
and T on the screen.
Manual
value
When the numeric value is input, the manual value
mode is canceled.
This erases all of the magazine data (tool Nos. and D)
of the magazine displayed on the screen.
Magazn
(Only the magazine data displayed is erased.)
clear
(Note) The contents of the ladder display cannot be
erased with this menu. Input "0" when erasing.
This designates the magazine No. to be displayed on
Magazn
1
the screen. The displayed menu differs according to
the machine specifications.
:
Magazn
5
The cursor moves to the PLC command setting area
PLC
and the mode changes to the setting mode.
search engine
3. Setup Screens
Details
key is pressed, the
INPUT
I – 204
Type
Reference
3.10.1
Register-ing a
tool in the
A
magazine pot
3.10.2 Changing
the spindle/
A
standby tool No.
1.5.1 Setting a
manual value
A
command
3.10.4 Erasing
the tool
registration data
B
3.10.1
Register-ing a
tool in the
C
magazine pot
3.10.3 Setting the
A
PLC command
Advertisement
Table of Contents
