Setting The Channel Of The Waveform To Be Displayed; Carrying Out Continuous Sampling; Carrying Out Single Sampling - Mitsubishi Electric MELDAS 600M Series Instruction Manual

(2) Menus
Menu
Continu
samplng
Single
samplng
<-
Scroll
->
Scroll
Wave
clear
Display
mode
Re-disp
To cond
set
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Sampling starts and the waveform is continuously displayed.
If this menu is selected again, the menu highlight returns to
normal, and the sampling is canceled.
If a trigger is set, the waveform will not appear until the trigger
is input. Even if another screen is displayed during sampling,
the sampling will not stop.
If a trigger is not set and another screen is displayed during
continuous sampling, the sampling will end at that point.
Sampling starts and the waveform for the sampled buffer is
displayed.
If another screen is displayed during single sampling, the
sampling will end at that point.
The sampling ends when the sampled buffer is filled, and the
menu highlight returns to normal.
The trigger setting is invalid.
The area displaying the waveform is scrolled 1/4 of a screen
to the left.
Note that this menu cannot be used during sampling.
The area displaying the waveform is scrolled 1/4 of a screen
to the right.
Note that this menu cannot be used during sampling.
The waveform displayed on the screen is erased.
Note that this menu cannot be used during sampling.
Set the channel of the waveform to be displayed. Up to three
channels can be set.
The cursor will move to the display mode field when this
menu is pressed.
This redisplays the waveform displayed before the screen
was changed.
Note that this menu cannot be used during sampling.
(Note) If the vertical scale, horizontal scale, base line and
offset conditions have been changed, the waveform
will be redisplayed using the changed conditions.
However, the other condition changes will not be
handled.
This changes to condition setting screen (screen for setting
conditions such as sampling, trigger data, waveform display).
search engine
5. Diagnosis Screens
Details
I – 292
Type Reference
5.8.2 Carrying
out continuous
sampling
A
5.8.3 Carrying
out single
sampling
A
−
C
−
C
−
C
5.8.1 Setting the
channel of the
C
waveform to be
displayed
−
C
5.7 Condition
Setting screen
(V Anlyz
condition
C
screen)