Setting The Tool Offset Data - Mitsubishi Electric MELDAS 600M Series Instruction Manual

(1) Display items
1. Program No.
2. Absolute/Incremental
selection
3. Display area
(2) Menu
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
This displays the program No., sequence No. and block No. currently
being executed.
When executing a subprogram, the subprogram program No., sequence
No.and block No. are displayed.
This indicates the selected mode (absolute or incremental).
This displays the tool offset data. The cursor appears, and setting
becomes possible. Data that cannot be displayed in the display area can
be displayed using the following keys.
↑
Offset No. : The number of the offset data.
(Types)
Type I
Type II
Menu
When this menu key is pressed, a random number is
set, and the
Offset
data with that number at its head appears.
No.
The cursor moves to the contents at the head of the
line.
This changes the setting mode to the absolute value
mode or incremental value mode.
Abs/Inc
This menu key changes the "Abso/Incr" selection from
incremental to absolute, and vice versa.
This returns the last rewritten data to its original value.
Undo
(This menu key is valid for "Data Input", "Paste", and
"Undo" operations.)
search engine
3. Setup Screens
, : Scroll one line at a time.
↓
Change the display contents, 14 lines at a time.
, :
: The display items differ, depending on the tool offset type.
Type I : Offset data
Type II : Length dimension / Length wear / Radius
dimension / Radius wear
Setting
Type
item
Offset This sets the combined amount of the
data shape offset and wear offset.
Length
This sets the offset amount of the tool
dimen-
length.
sion
Length This sets the wear offset amount of
wear the tool length.
Radius
This sets the offset amount of the tool
dimen-
radius.
sion
Radius This sets the wear offset amount of
wear the tool radius.
Details
key is pressed, the tool offset
INPUT
I – 111
Details
Details
Type
3.1.1 Setting the
tool offset data
A
1.5.3 Changing
the absolute
C
value/incre-ment
al value setting
C
Display
range
–99999.999
~99999.999
–99999.999
~99999.999
–999.999
~999.999
–99999.999
~99999.999
–999.999
~999.999
Reference
–