Table of Contents
Advertisement
2.3 Position Display 3 screen (Position display3 screen)
Various information regarding automatic operation is displayed on this screen, and the program can be
checked.
This screen has two display area, and the displayed details and system can be randomly selected and
displayed from the menu. The selected screen is held even when the screen is changed.
1. Display
area 1
4. Actual feedrate
5. Counter 1
display
Counter 2
display
6. S, M, T, B,
command
7. Buffer display
(1) Display items
1. Display area 1
2. Display area 2
3. System display
4. Actual feedrate
5. Counter 1 display
Counter 2 display
6. S,M,T,B commands
7. Buffer display
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
Display item
The display can be randomly selected from the
Program modal
Local variabl
The system can be selected for each area.
When changing the display details or system, select display area 1 or 2,
and validate the area before starting.
In the above screen, the counter is selected for display area 1, the modal
display for display area 2, and the display area 2 is valid.
This displays the currently selected system.
This displays the actual feedrate.
This displays the counter of the current position and workpiece
coordinates positions, etc.
The type of counter displayed can be selected with the menu key.
This displays the command value for the S (spindle speed command
value), M (miscellaneous function command value), T (tool command
value), and B (2nd miscellaneous function command value).
This displays the details of the currently executed machining program.
The currently executed block is highlighted.
search engine
Details
,
,
Run-out time
Posn display
menus.
I – 39
2. Display area 2
3. System display
,
Program tree
,
or
Common variabl
Advertisement
Table of Contents
