Table of Contents
Advertisement
3.5.7 Computer Link Parameter screen
The computer link parameters are set. Parameters with an " ∗ " added are validated after restarting.
Number
38 0001
38 0002
38 0003
38 0004
38 0005
38 0006
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Name
Port number
This sets the number of the I/O port for the computer
link.
The I/O port No. is fixed to 1.
Link type
This sets the computer link function type.
The computer link function type is fixed to 2.
Baud rate
This sets the speed for transmitting the data.
Stop bit
This sets the stop bit length for the start-stop method.
Refer to the item for "380005 Parity valid".
Set the bit length that matches the input/output
device's specifications.
Parity valid
This parameter is set to use a parity bit different from
the data bit.
ON
OFF
Start bit
Set this to match the I/O device specifications.
Even parity
This parameter selects the odd parity or even parity
when the above parity is valid. This parameter is
ignored when the parity is invalid.
Set this to match the I/O device specifications.
search engine
3. Setup Screens
Details
One character
b1 b2 b3 b4 b5 b6
bn
Data bit
Parity bit
I – 173
Setting range (units)
0 : Port 0
1 : Port 1
2 : Port 2
1 : Link A
2 : Link B
2400 (bps)
4800
9600
19200
1 : 1 (bit)
2 : 1.5
3 : 2
0 : No parity bit at
input/output
1 : Parity bit at
input/output
Stop bit
0 : Odd parity
1 : Even parity
Advertisement
Table of Contents
