Pallet Details Screen - Mitsubishi Electric MELDAS 600M Series Instruction Manual

(2) Menus
(3) Setting pallet program search
(4) Setting continuous start
(5) Precautions
• Only decimal (1 to 99999999) programs can be registered.
In addition to the NC memory, the HD, FLD and IC card programs can be registered. However,
these programs must be in the root directory.
• Up to twelve pallets can be registered.
• Regardless of whether the program is running, an error message may appear depending on the
PLC device value.
• The auxiliary setting range is –32768 to 32767.
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Menu
The state (Program Search, Program Start)
ON indicated by the cursor is validated.
This menu can be used only when the cursor is at
Program Search or Program Start.
The state (Program Search, Program Start)
OFF indicated by the cursor is invalidated.
This menu can be used only when the cursor is at
Program Search or Program Start.
Prev Information on the previous two pallets is displayed.
pallete
Next Information on the next two pallets is displayed.
pallete
A random value can be set for each S, M, T and B
Manual data on the screen.
value
When a value is set, the selected S, M, T or B
function will be executed.
The screen is shifted to the Pallet details screen.
Pallete
The 0° or 90° data of the pallet displayed on the top
details
line of the Pallet List screen is displayed.
1)
Using the , or tab keys,
↑ ↓
move the cursor to the
"Program Search ON/OFF"
position, and press the menu
key ON or OFF .
1)
Using the , or tab keys,
↑ ↓
move the cursor to the
"Program Start ON/OFF"
position, and press the menu
key ON or OFF .
search engine
3. Setup Screens
Details
The set details will appear at "Program Search".
The set details will appear at "Program Start".
I – 213
Type Reference
(3) Setting pallet
program search
C
(4) Setting
continuous start
C
–
C
–
C
1.5.1 Setting a
manual value
A
command
3.11.3 Pallet
C Details screen