Mitsubishi Electric MELDAS 600M Series Instruction Manual page 136

(2) Setting the offset data of the external coordinate system
When the external workpiece coordinate system data is set, the coordinate system deviation is
measured using the external touch sensor, etc.
While keeping the current offset value of the workpiece coordinate systems G54 to G59 as they are,
all of the data can be compensated (offset).
Using the data transfer function, the external data can be directly written to the external offset data
(EXT). (Refer to "3.3.2 Transferring a file" for details.)
3.2.2 Erasing the coordinate system offset data
(Note) G92 data cannot be erased.
(1) Erasing the offset data of the coordinate system (excluding G92) indicated by the cursor for
all axes
(2) Erasing all axis offset data of all coordinate systems
(excluding G92 and EXT)
3.2.3 Setting the workpiece coordinate zero point
When the menu key
position (for all axes) becomes the workpiece coordinate zero point. Only the axis at the cursor can be
set. The local coordinate system offset is cleared to zero.
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Press the menu key
.
All axs clear
2)
Press the key.
Y
1)
Press the menu key
.
ALL clear
2)
Press the key.
Y
Easy setting
search engine
3. Setup Screens
The menu is highlighted.
A message appears to confirm the erasing.
All of the coordinate system indicated by the cursor is
cleared to zero.
(Including local coordinate data)
The menu is highlighted.
A message appears to confirm the erasing.
All of the coordinate system data is erased.
is pressed, the coordinate system offset is set so the current machine
I – 121