Mitsubishi Electric MELDAS 600M Series Instruction Manual page 38

Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1. Operating the Setting and Display Unit
7)
Press the menu File name .
(Note) If the device is set to memory, and the directory is not the program, the file name does
not need to be set.
8)
Designate the file name.
1001 INPUT
The following two methods can be used to designate the file name.
• Input the file name, and press the
• Press the menu key
key.
INPUT
Designate the FLD program file as the transfer destination.
9)
Press Area change , and
validate the B: (transfer
designation) display area.
10)
Press the menu
Device select .
11)
Press the menu FLD .
12)
Select the menu Dir .
13)
Input the directory path.
/PROGRAM/TEST INPUT
search engine
The mode for inputting the file name is entered.
(The cursor appears at "File:".)
The following menu appears.
From
list
A : Device
Directory
File
key.
INPUT
, move the cursor to the target file name, and press the
From list
The B display area is validated and the cursor appears.
The following menu appears.
Memory RS232C
The selected device name appears.
A : Device
Directory
File
The mode for inputting the directory name is entered.
The following menu appears.
From
list
The input directory path appears.
A : Device
Directory
File
I – 23
: Memory
: PROGRAM
: 1001
HC IC card Ethernet FLD
FLD
:
:
:
: FLD
/PROGRAM/TEST
:
: