Mitsubishi Electric MELDAS 600M Series Instruction Manual page 494

3.8 Auxiliary axis system alarms (AZ
AZ0070
Alarm
infor-
mation
0001
0002
0003
AZ0071
Alarm
infor-
mation
0001
Downloaded from ManualsNet.com
Appendix 3. Alarm Messages
Aux axis ABS position error
Details
Zero point The zero point has not been
initialization initialized in the absolute position
incomplete system.
Absolute The absolute position coordinate
position data data in the amplifier has been lost.
lost
Absolute The absolute position system
position system related parameters have been
related changed or lost.
parameter error
Aux axis drop voltage
Details
Absolute The data in the detector has been
position lost due to battery voltage drop.
detector data Battery voltage drop
lost Detector cable wire breakage or
looseness
search engine
CHAPTER 4 APPENDICES
)
IV – 52
Remedy
• Initialize the zero point.
• Initialize the zero point.
• Correctly set the parameters and
then initialize the zero point.
Remedy
• Check the battery and detector
cable and then initialize the zero
point.