Mitsubishi Electric MELDAS 600M Series Instruction Manual page 63

2.4.1 Executing an operation search
(1) Operation search operation sequence
Designate the device where the target file
is located.
Designate the directory with a full path.
Designate the file name.
Execute the operation search.
(2) Operation method
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
↓
↓
↓
1)
Select the device.
Menu
Device select
(Note) The menu key HD will display as Data server for the MELDAS610M, 630M and
650M.
2)
Select the device, and press
the menu key.
.
HD
(Example)
3) Device: HD, FLD and IC card
Select the directory.
Menu .
Dir change
4) Device: HD, FLD and IC card
Input the directory path.
(Example)
/PROGRAM
INPUT
The following two methods can be used to set the directory path.
• Set the directory path (full path) in the data setting area, and press the
• Press the menu key
key.
INPUT
If the list contents differ from the actual device or directory, press the
(Note)
menu.
search engine
→ Select from the submenu.
→ Input with a full path or select from the list.
(For device having a directory)
→ Input the file name from the keypad or select
from the list.
→ Press the menu key
The menu of devices that can be selected appears.
Memory RS232C
The selected device name appears in the device
setting column.
The root directory (/) of the selected device appears
in the Directory.
Dev ice
Directory
The mode for inputting the directory name is entered.
The set directory path appears.
Device HD
Directory /PROGRAM/
, move the cursor to the target directory, and press the
From list
I – 48
.
Search exec
HD IC card
HD
/
INPUT
FLD
key.
List update