Mitsubishi Electric MELDAS 600M Series Instruction Manual page 310

5.8.3 Carrying out single sampling
When the menu key Single samplng is pressed, the sampling will start and the waveform for the
sampled buffer will display. When the sampled buffer is filled, the sampling will stop and the menu
highlight will return to normal.
(1) Carrying out single sampling
(2) Notes for single sampling
1) If t another screen is displayed during single sampling, the sampling will end at the point the
2) The waveform single stops when the sampling buffer is full. The stop trigger conditions (stop
3) Only data handled as Long type data can be registered as an NC file on the V Anlyz condition
4) The sampling buffer is a 3072-point ring buffer (1536 points for 2-channel synchronization,
5) The auxiliary axis data can be sampled when the parameter "110067 AUX axis nos" is set to
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Press the menu key
To cond set to display the
V Anlyz condition screen.
Then, set the conditions and
data.
Refer to section "5.7.1
Setting the condition data" for
details.
2)
Press the menu key
Display mode , and set the
channel of the waveform to
be displayed.
Refer to "5.8.1 Setting the
channel of the waveform to
be displayed" for details.
3)
Press the menu key
Single samplng .
other screen was displayed. Thus, when the Visual analyzer screen is returned to from the
other screen, the waveform will be cleared and the sampling will be stopped.
trigger signal, stop signal level setting) and delay time will be invalidated.
screen. If data that cannot be handled as a Long type is set, a "Setting error" will occur when
the Single samplng menu is selected.
1024 points for 3-channel synchronization). Thus, the waveform display will rely on these
number of points.
more than one.
search engine
5. Diagnosis Screens
The V Anlyz condition screen will open.
After setting the conditions or data, press the menu
key To V-Anlyz to display the Visual analyzer
screen.
The sampling and waveform display will start.
I – 295