Mitsubishi Electric MELDAS 600M Series Instruction Manual page 293

(2) Menus
(Note) Decimal, hexadecimal and floating point data writing is possible.
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Menu
This erases the information in the line where the
Line
cursor is at. (One entire line becomes blank.) The
clear
cursor does not move at this time.
The contents of the set address data (Addr, Object
No./Item No./Data No./Size/Display format) for all the
lines is constantly displayed.
Data
read
The Data No. highlight (indicating data is being set) is
released.
The cursor appears in "Addr" of that line.
This writes the data
memory indicated by address data at the cursor
position.
Data
The Data No. highlight (indicating data is being set) is
write
released, and constant display is started.
After writing, the cursor moves to "Addr" of the next
line.
Based on the "Addr" and "Size" data of the line where
the cursor is at, the address contents are
continuously displayed from the cursor line.
Continu
display
When NC data is designated, the data is continuous
data to which the data Nos. are added.
The cursor moves to "Addr" of that line.
Decimal : Integers without decimal points......... (Ex.) –1234
Hexadecimal : An "H" is necessary at the end.......... (Ex.) 1234H
Floating point data : Data with a decimal point ................ (Ex.) –12.3
search engine
5. Diagnosis Screens
Details
(Note)
in the setting area to the NC
I – 278
Type Reference
C –
5.5.1 Writing/
reading the data
using the NC
C
data designation
A
C –