Graphics Screen - Mitsubishi Electric MELDAS 600M Series Instruction Manual

2.6 Graphics screen

The machine tool operation can be monitored and the machining program path displayed on the
Graphics screen. This is handy for inspecting the program.
Trace function
Program check function : This function displays the machining program movement path without
2. Tool mark
3. Program
display
(1) Display items
1. Display area
2. Tool mark
3. Program display
4. Machine position
5. Machining time
6. Program No.
7. Display mode
8. Scale
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
: This function displays the actual machine movement path, and draws the
actual machine movement.
The machine operation during machining can be monitored.
carrying out automatic operation. The operation results in the CNC are drawn.
Thus, the figure can be drawn at a high speed, allowing the machining
program to be checked.
1. Display area
Display item
This is the area for drawing the tool path during the check and trace.
This indicates the tool position during the trace. If this mark is not within
the display area, it is assumed that the tool position is outside the
screen's display range. Thus, the display range must be changed.
This displays the machining program being drawn. The block being
executed is displayed in blue.
This displays the machine position counter and feedrate (F). The three
axes set in the parameters are displayed.
When a program check is carried out, this calculates and displays the
time required for machining.
This displays the program No., sequence No. and block No. currently
being executed. During execution of a subprogram, each subprogram
No. is displayed.
This displays the plane to be displayed. The plane can be selected with
the menu
This displays the scale of the display area. The scale value can be set
with
search engine
.
Display mode
.
Display range
I – 72
4. Machine position
5. Machining time
6. Program No.
8. Scale
Details
7. Display mode