Mitsubishi Electric MELDAS 600M Series Instruction Manual page 222

3.10.4 Erasing the tool registration data
(1) Selecting a magazine No. and erasing the tool registration data
(2) Erasing spindle/standby tool registration data
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Press the menu Magazn
2)
Press the menu
.
Magazn clear
3)
Press the or
Y INPUT
1)
Press the menu key
Spindle standby .
2)
Using and , move the
↑ ↓
cursor to the item where the
data is to be erased.
3)
Set "0", and press the
key.
INPUT
0
INPUT
search engine
3. Setup Screens
The tool registration data of the selected magazine No.
2 .
appears.
The message "Erase? (Y/N)" appears.
All of the "Tool No.-D" data of the magazine No.
key.
displayed in the screen are erased.
Spindle/standby data is not erased.
The cursor appears in the "Spnd/standby" tool No.
The spindle/standby data is erased.
I – 207