Mitsubishi Electric MELDAS 600M Series Instruction Manual page 299

5.7.1 Setting the condition data
Set the various condition data.
When setting the type of sampling data, refer to section "5.7.2 Selecting the sampling data". The other
items can be set with method (1) below. (Also refer to section "1.4 Setting data".)
For actual setting examples, refer to section (2).
(1) Example for setting "8.0" for offset in channel 2 setting area
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Press the menu key
Area change , and select
the channel 2 area.
2)
Using the and
↑ ↓
move the cursor to the
Offset position.
3)
Input the data.
8.0 INPUT
search engine
5. Diagnosis Screens
The cursor appears at the channel 2 area.
Ch2
Data
V-scale/div
Base line
Offset
Samp valid
keys,
The cursor moves to the "Offset" position.
Ch2
Data
V-scale/div
Base line
Offset
Samp valid
The set value displays.
Ch2
Data
V-scale/div
Base line
Offset
Samp valid
I – 284
X/Position command
10000
0
0
0
X/Position command
10000
0
0
0
X/Position command
10000
0
8.0
0