Mitsubishi Electric MELDAS 600M Series Instruction Manual page 35

(4) Operation method
The method to select the file (program) to be operation searched on the Operate screen (Example 1),
and the method for transferring the memory file to a FLD on the Input/Output screen (Example 2) are
explained in this section.
(Example 1) To select the file to be operation searched on the Operate screen
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1. Operating the Setting and Display Unit
1)
Select the Operation search
screen.
2)
Select the device.
Menu Device select
3)
Select the menu HD .
4) Device: HD, FLD and IC card
Press the menu Dir change .
5) Device: HD, FLD and IC card
Set the directory path.
/PROGRAM INPUT
The following two methods can be used to set the directory path.
• Input the directory path (full path) in the data setting area, and press the
• Press the menu key
key.
INPUT
search engine
The Operation search screen appears.
The following menu appears.
Search Verify
exec stop
The menu for the selection devices appears.
Memory RS232C
The selected device name appears in the device setting
column.
The HD root directory (\) appears.
The mode for inputting the directory name entered.
The set directory path appears.
, move the cursor to the target directory, and press the
From list
I – 20
Stop Device Dir List
cancel select change update
HD IC card FLD
INPUT
From
list
key.