Mitsubishi Electric MELDAS 600M Series Instruction Manual page 195

Display item
Mthd
L compen
R compen
Auxil
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Tool life management method
Tool radius compensation data format
Tool length compensation data format
a. Tool life management method
0 : Usage time
This manages by the cutting execution time.
1 : Number of mounting times
This manages by the number of times the tool became the
spindle tool in tool replacement, etc.
2 : Number of uses
Refer to Note of the "Life" explanation.
3 : Wear
(Not used)
b. Tool radius compensation data format
c. Tool length compensation data format
0 : Compensation No. method
This treats the compensation data in the tool data as a
compensation No., and compensates by substituting that
number for the compensation No. commanded in the
machining program.
1 : Addition compensation method
This treats the compensation data in the tool data as an
addition compensation amount. Compensation is carried
out by adding that amount indicated by the compensation
No. commanded in the machining program.
2 : Direct compensation method
This treats the compensation data in the tool data as a
direct compensation amount. Compensation is carried out
by substituting that amount for the compensation amount
indicated by the compensation No. commanded in the
machining program.
This depends on the data format designated in "Mthd".
This depends on the machine manufacturer specifications.
search engine
3. Setup Screens
Details
I – 180
Setting range
Compensation
No. : 1 to 400
Added
compensation
amount :
±1 to
99999.999
Direct
compensation
amount :
±1 to
99999.999
0 to 65535