Table of Contents
Advertisement
(2) Menus
Comment
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Menu
A random variable No. can be selected.
Set the variable No., and press the
Variabl
No.
The variable with that number at the head displays.
The cursor moves to the details for that variable No.
This changes the setting mode to the absolute value or
incremental value mode.
Abs/Inc
This menu changes the setting method (absolute
value/incremental value).
This displays the variables following the variable
displayed in the area with the cursor in the area not
containing the cursor.
When cursor is at left area:
The continuing variable Nos. appear in the right
area. If the variable No. at the last line of the left area
is the last variable, the display on the right area starts
from the head of the variable No.
Continu
When cursor is at right area:
The variables with numbers smaller than those
displayed in the right area are displayed in the left
area. If the head line of the right area is the first
variable No., the section to the end of the variable
No. is displayed in the left area.
(Note) This menu can be used when the Machine
parameters Base com param "110049 Invld
Continu menu" is set to 0.
This copies the contents (only one line amount) of the
Copy
variable No. at the cursor position to the clipboard. The
copied line is highlighted, and returns to normal after
pasted.
This pastes the copied contents (only one line amount)
of the variable No. at the cursor position. The copied
Paste
line can be pasted as often as necessary until a new
area is copied.
This returns the last rewritten data to its original value.
(This menu key is valid for "Data Input", "Paste" and
Undo
"Undo" operations.)
(Note) Return to the original value is not possible after
variable clear and comment clear operations.
This clears the contents of the variable No. or
continuous variable Nos. at the cursor position.
Variabl
clear
(Note) The contents are not cleared to "0". The state
with no data is entered.
This clears the comment of the variable No. or
continuous variable Nos. at the cursor position
clear
(Comment: variable Nos. 500 to 519).
This changes the screen to the Local Variable screen.
To loc
Press the
To com variabl
variabl
Common Variable screen.
search engine
2. Monitor (Operation) Screens
Details
INPUT
menu key to return to the
I – 92
Type
Reference
2.7.1 Setting
common
key.
A
variables
1.5.3 Changing
the absolute
C
value/
incremental
value setting
C
2.7.2 Copying/
pasting common
A
variables
2.7.2 Copying/
pasting common
C
variables
C
2.7.3 Erasing
common
A
variables (1)
2.7.3 Erasing
A
common
variables (2)
2.8 Local
Variable screen
C
–
–
Advertisement
Table of Contents
