Table of Contents
Advertisement
3.11.2 Pallet list screen
The program No., machining validity and machining index plane for each pallet are displayed on this
screen.
(Note 1) This screen appears when the base common parameter APC type (#110141) is set to 1.
1. Pallet Program
No., Dev.
2. Machining
ON/OFF
8. Machining
index
l
3. Program Search
ON/OFF
5. Program Start
ON/OFF
(1) Display items
1. Program No., Dev.
2. Machining ON/OFF
3. Program Search
ON/OFF
4. Program Start
ON/OFF
5. Device Name,
file list
6. M, S, T, B
command
7. Program being
executed
8. Machining index
plane
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Display item
The machining program No. and device registered for each index plane of
each pallet are displayed.
The ON/OFF state of machining for each pallet is displayed.
The ON/OFF state of search for the registered machining program is
displayed.
When set to ON and the program being machined ends, the next program
registered will automatically be searched for. The next program is a
program for which machining is set to ON, and is the next index plane
program for the pallet in the machine. When the search is executed, the
external workpiece coordinates set on the Pallet details screen will be set
as the external workpiece coordinate shift (EXT). Note that automatic
restart is invalid in this case. If automatic restart is turned ON with the PLC
switch, it will be turned OFF automatically.
The ON/OFF state of continuous start for the registered machining
program is displayed.
When set to ON, the searched program will be restarted for the pallet in
the machine.
This setting is valid only when Program Search is set to ON.
The device names and a list of the files are displayed.
The listed devices cannot be updated on the Pallet list screen. The
displayed list is the list displayed on the Pallet details screen. Note that the
memory list is displayed when the power is turned ON.
Each M, S, T, B command value is displayed.
A manual value command can be issued.
The program being executed is displayed.
An asterisk is displayed at the angle to which the machining plane is
indexed.
search engine
3. Setup Screens
Details
I – 212
5. Device Name,
file list
6. M, S, T, B
command
7. Program being
executed
Advertisement
Table of Contents
