Mitsubishi Electric MELDAS 600M Series Instruction Manual page 37

(Example 2) To select a program file to be transferred from the memory to a FLD on the
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1. Operating the Setting and Display Unit
Input/Output screen
Select the memory program file as the transfer origin.
1)
Select the Input/Output screen.
2)
Press Area change , and
validate the A: (transfer origin)
display area.
3)
Press the menu
Device select .
4)
Press the menu Memory .
5)
Select the menu Dir .
Program
6)
Select the directory path
(program) from the menu.
The following two methods can be used to set the directory path.
• Set the directory path (full path) in the data setting area, and press the
• Press the menu key
key.
INPUT
search engine
The Input/Output screen appears.
The following menu appears.
Area Device
change select
The A display area is validated.
The cursor appears at "A: Device".
The following menu appears.
Memory RS232C HD
The selected device name appears.
When memory is selected, "Program" appears in the
directory as a default.
A : Device
Directory
File
The mode for inputting the directory name is entered.
(The cursor appears at "Directory:".)
The following menu appears. When selecting a device
other than the memory, refer to the procedures for
selecting the transfer destination FLD file.
Variabl Tool
Tool
life
offset
The set directory path appears on the screen.
A : Device
Directory
File
, move the cursor to the target directory, and press the
From list
I – 22
Dir File List
name update
IC card Ethernet FLD
Memory
:
Program
:
:
User Machine
param param
Memory
:
Program
:
:
INPUT
Trnsfr
• • •
A ->B
System
param
key.