Copying/Pasting Parameters - Mitsubishi Electric MELDAS 600M Series Instruction Manual

3.4.2 Copying/pasting parameters

The parameters can be copied and pasted to the parameters with the same number in another axis.
(1) Copying the line where the cursor is at
(2) Designating and copying a range
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Move the cursor to the
parameter to be copied.
2)
Select area copy.
Menu
Area copy INPUT
1)
Move the cursor to the display
area of the axes to be copied.
2)
Press the menu
Area copy
3)
Designate the copy range.
Format: First No./Last No.
340007/340009
INPUT
(Note 1) If the
INPUT
cursor is at is copied.
(Note 2) The copy target range highlight returns to the normal display by pasting.
search engine
3. Setup Screens
The menu is highlighted.
The setting value the parameter at the cursor position
highlighted.
The menu highlight returns to normal.
The menu is highlighted.
.
The copy target range is highlighted.
The menu highlight returns to normal.
key is pressed without setting a number, the parameter where the
I – 149