Mitsubishi Electric MELDAS 600M Series Instruction Manual page 152

3.3.4 Erasing a file
This section explains the method of erasing a file.
Refer to "3.3.1 Selecting a device, directory and file" for the method of designating a device, directory and file.
(1) Erasing a file
(2) Erasing a file
The operations are the same as method (1) above. Set the target device, directory and file name in
the file setting column B, and press the menu
(Note) If the file to be erased is running, an error will occur, and the file will not be erased.
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Erase A
1)
Press the menu
, and select file
Area change
setting column A.
2)
Designate the device,
directory and file name to be
erased.
3)
Press the menu
Erase A
4)
Press or .
Y INPUT
Erase B
search engine
3. Setup Screens
The designated file appears.
A message to confirm the erasing appears.
.
The file is erased.
A message appears when the erasing is completed.
The number of programs registered, number of
memory characters and remainder reappear. Press the
menu to update the list.
List update
.
Erase B
I – 137