Mitsubishi Electric MELDAS 600M Series Instruction Manual page 462

(None)
Waiting for dialing
(Status of
communication with
NC service)
(Status of
communication with
machine
manufacturer)
(5) Messages related to number 1 to 3 menu operations
(None)
(6) Messages related to random number setting
(None)
(7) Messages related to communication errors
Modem initial error
Communication error
Downloaded from ManualsNet.com
Appendix 2. Operation Messages
Message Display in message field
Press Call to call the NC service.
Do not turn the power OFF during
the one-touch call.
Do not turn the power OFF until the
one-touch call is completed.
Connecting with NC service.
Wait for communication to end.
Connecting with machine
manufacturer.
Wait for communication to end.
Message Display in message field
Press Call to call the NC service.
Do not turn the power OFF during
the one-touch call.
Message Display in message field
Input the new telephone number.
Message Display in message field
Press one-touch call to call the NC
service.
Do not turn the power OFF during
the one-touch call.
Press one-touch call to call the NC
service.
Do not turn the power OFF during
the one-touch call.
search engine
CHAPTER 4 APPENDICES
IV – 20
Details
• Communication with one-touch
call has ended, and the line has
been disconnected.
• Redialing since the NC service is
using the line for other
communication.
• In connection standby state since
line is being used by anshin-net.
• In connection standby state since
line is being used by machine
network.
Details
• The selected telephone number
will be set as the telephone
number to be notified to the NC
service.
• Hereafter, the telephone number
set with one-touch call or operator
notification will be notified to the
NC service.
Details
• The input telephone number will
be set as the telephone number to
be notified to the NC service.
• Hereafter, the telephone number
set with one-touch call or operator
notification will be notified to the
NC service.
Details
• Communication is not possible
because the modem is not
connected, etc.
• A communication error occurred
while connected to the NC
service.