Mitsubishi Electric MELDAS 600M Series Instruction Manual page 34

Device menu's submenus
(Note 1) The devices that can be used differ according to the operations and to the provision of
(Note 2) If the
(Note 3) When designating the directory or file name, the designated is not fixed when the
(Note 4) If a file other than a machining program is selected when Device memory is set, the file
(Note 5) Depending on the screen, the
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1. Operating the Setting and Display Unit
Menu
Memory
This selects the memory.
RS232C
This selects RS-232C (including tape).
This selects the hard disk.
HD
(Note) This menu is indicated as Data server for the
MELDAS610M, 630M and 650M.
This selects the IC card.
(Note) Use a recommended IC card that matches the
IC card
Mitsubishi quality standards.
(Refer to section "3.3 Data Input/Output screen"
for the recommended products.)
Ethrnet
This selects Ethernet.
FLD
This selects the floppy disk.
options.
key is pressed when selecting the file name, the file name at the data setting
area is erased. The file already selected on the screen may or may not be erased,
depending on the screen.
directory name or file name is just displayed at the data setting area. Confirm that these
items are displayed at the data setting area, and then press the
name cannot be designated. (The file name is fixed.)
this case, input the directory path and file name from the data setting area.
search engine
Details
List update and From list
I – 19
Type Reference
−
C
−
C
−
C
−
C
−
C
−
C
key.
INPUT
menus may not be provided. In