Mitsubishi Electric MELDAS 600M Series Instruction Manual page 251

(2) Selecting a program from a list
For step 3) in (1) Operation method, the program can be selected from a list as explained below.
Only the details relevant to the step 3) operation are explained here.
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1)
Press the menu key
When List is pressed again,
the list disappears and returns
to the original state.
2)
Move the cursor and select
the program No.
or
INPUT
↑ ↓
Even if all Nos. cannot be
displayed, the remaining Nos.
can be scrolled and displayed
by pressing the and
↑
keys.
(Note 1) If basic common parameter "Fix_P" is set to 1, a list of the Fixed cycle programs will
appear.
(Note 2) If the selected program is running, it can be displayed but not edited. Even if data is
set, an error will occurs when the
saved.
search engine
4. Edit Screens
The menu is highlighted, and the list appears in the
.
List
area currently not used. The area displayed is active.
The cursor moves to the head program No. in the list.
The selected program is displays from the head. The
cursor moves to the head character of the program.
The mode enters the overwrite mode.
↓
INPUT
I – 236
key is pressed, and the data will not be