Table of Contents
Advertisement
1.5.8 Menu operations
(1) Menu types
The menus can be categorized as follow according to the operation after the menu key is pressed.
When the menu key is pressed:
A. The menu is highlighted, and the user input standby state is entered. After input, the operation
B. The menu is highlighted, and operation starts.
C. Operation starts without the menu highlighted.
In this manual following "2. Monitor Screens", this categorization is described as follows.
(Example) Explanation of menus used in Data Input/Output screen
(2) Menu display
The menu that can currently be used appears in the menu display area. A menu name displayed in
gray indicates that the menu cannot be used. Depending on the parameter (operation parameter
"Invalid gray menu∗") setting, menus that are not used can be set not to display.
The counter display area is not valid in the screen below, indicating that the menu for selecting the
counter type is invalid.
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
1. Operating the Setting and Display Unit
follows the input details.
Menu
This changes the setting area to file setting column A
Area
(transfer origin) or file setting column B (transfer
change
destination). The display of the valid area (A or B) is
highlighted.
This updates the list. The directory list selected in the
List
update
currently valid file setting column (A or B) is updated.
This copies the file in file setting column A (transfer
origin) to the file setting column B (transfer
Trnsfr
destination). (The transfer origin file is not changed.) A
A → B
message appears during transfer and when the
transfer is completed.
This interrupts the process (transfer, compare, etc.)
Stop
during execution.
Operation when menu is pressed
search engine
Details
I – 27
Type
Reference
1.5.2 Changing
the valid area
C
C
3.3.2
Transferring a file
B
C
Menu type Reference section
Advertisement
Table of Contents
