Erasing The Tool Offset Data; Copying/Pasting The Tool Offset Data - Mitsubishi Electric MELDAS 600M Series Instruction Manual

Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Menu
This erases a designated line (multiple lines possible)
of offset data.
Designation method:
Offset No. where erasing begins/ Offset No. where
Line erasing finishes
clear
(Ex.) 1/E : All offset data is set to "0".
When the
INPUT
a line, only the line where the cursor is currently at is
erased.
This copies the contents of the designated line (one
Line
copy
line amount) of tool offset data.
This writes, in the line where the cursor is at, the
contents (one line amount) of the copied tool offset
data.
If the copied line of data is changed after the menu key
Line
paste
is pressed, original data is written when
Line copy
pasted.
Once copied, a line of data can be pasted any number
of times until a new area is copied.
This copies one data item at the cursor position.
Copy
The copied data item is highlighted, and returns to
normal when pasted.
This pastes the copied data item at the cursor position.
Paste
Once copied, an item of data can be pasted any
number of times until a new data item is copied.
search engine
3. Setup Screens
Details
key is pressed without designating
I – 112
Type Reference
3.1.2 Erasing the
tool offset data
A
3.1.3
C
Copying/pasting
the tool offset
data (1)
C
3.1.3
Copying/pasting
C
the tool offset
data (2)
C