Edit Screens; Edit Screen - Mitsubishi Electric MELDAS 600M Series Instruction Manual

4. Edit Screens

4.1 Edit screen

The programs in the NC memory are edited (added, deleted, changed) and newly created in the Edit
screen.
Programs include the machining programs, MDI programs and Fixed cycle programs. These are stored
in different directories within the memory.
(Note) Machining programs are managed with numbers (long type data).
This screen is configured of the left and right areas. The edit buffer or machining program list is displayed
in each area. (These can be changed with the menu keys.)
If operations on this screen are canceled, and another screen is moved to, the next time the Edit screen
is selected, the selected area, cursor position and display area, etc., will be the same as before the Edit
screen was previously left. This allows editing operations to be continued.
3. Program
display area
Line No.
Editing area
1. Left area
If the operation parameter 370042 "Space mode in Editor" is set to 1, spaces are inserted in word units
when the program is displayed.
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
search engine
4. Edit Screens
I – 230
4. List display area
2. Right area