Tracing And Displaying The Machine Position; Checking The Program; Changing The Display Range; Changing The Display Mode - Mitsubishi Electric MELDAS 600M Series Instruction Manual

2.6.1 Tracing and displaying the machine position

Press the menu key
During the trace mode, the path of the machine by actual automatic operation or manual operation is
constantly drawn.
(1) Menus used in trace display
Operate
Program
Program
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
when selecting the trace mode.
Trace ON
Menu
This changes the screen to Operation Search screen.
search
This enters the trace mode. If there is a program
Trace
currently running, the path of the machine position is
ON
drawn from the current position.
This erases the figure displayed with graphics.
Erase
This displays the machining program being drawn.
display
This changes the display scale and the display
Display
position. The changes are selected from the menu.
range
The graphics displayed on the screen are erased.
This changes the display plane and system. The axes
corresponding to X, Y and Z are set with operation
parameters.
• Parameter (370020 to 370025)
$1 $2
Display X X1 X2 ... Axis for each system
mode
Y Y1 Y2 ... Axis for each system
Z Z1 Z2 ... Axis for each system
The graphics displayed on the screen are erased.
This changes the direction of the view when displaying
in the three-dimensional display mode.
Rotate
Rotate the cube at the lower right with the
→ ←
and keys, and fix with the
The graphics displayed on the screen are erased.
This is used when checking the program.
check
search engine
2. Monitor (Operation) Screens
Details
corresponding to X
corresponding to Y
corresponding to Z
INPUT
I – 73
Type Reference
2.4 Operation
C
Search screen
B
C
C
2.6.3 Changing
A
the display range
2.6.4 Changing
the display mode
C
2.6.5 Changing
the display angle
, ,
↑ ↓
A
key.
2.6.2 Checking
B
the program
–
–
–