Mitsubishi Electric MELDAS 600M Series Instruction Manual page 103

(4) Randomly changing the display scale 2 (Pressing the Scale key)
(5) Changing the display range for the two plane display mode
When using a two plane display mode such as X-Y/Y-Z, the upper and lower areas change to the
same display range (position and scale value).
The operation method is the same as the one plane display mode.
(Note) The position display movement
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
2. Monitor (Operation) Screens
1)
Press the menu key
.
Display range
2)
Press the menu key
.
Scale
3)
Set a random value (ex.: 270),
and press the
INPUT
To reduce the figure:
Set a value larger than the
current value.
To enlarge the figure:
Set a value smaller than the
current value.
using the and
↑ ↓
place only for the upper area or
lower area. Use the
keys to change the area to be
moved (upper/lower).
search engine
A white frame indicating the display range appears on
the screen, and the menu for changing the display
range appears.
The data setting cursor appears in the data input area.
The current graphics display is erased, and a screen
with the new scale value (270) appears.
key.
Drawing resumes from the current position.
keys takes
and
I – 88