Mitsubishi Electric MELDAS 600M Series Instruction Manual page 465

2.17 Maintenance-related operation messages
Execute? (Y/N)
Executing format
Format complete
Format error
Format NC memory?
(Y/N)
Quite HMI? (Y/N)
Password is illegal
Input the password
Execute SRAM
backup? (Y/N)
Executing backup
Backup complete
Backup error
2.18 Other operation messages
Setting error
Data protect
Launching application
Downloaded from ManualsNet.com
Appendix 2. Operation Messages
Message
• Message to confirm the operation.
[Y] or [INPUT] : Execute the operation.
[N]
• The formatting is being executed correctly.
• The formatting completed correctly.
• The NC memory formatting failed.
→ Contact the nearest service center.
• Message to confirm the operation.
[Y] or [INPUT] : Start formatting the NC memory.
[N]
• Message to confirm the operation.
[Y] or [INPUT] : Quit the HMI.
[N]
• The input password is incorrect.
• The [Password] menu key was pressed, and the password input mode
was entered.
→ Input a password.
• Confirmation of operations.
[Y] or [INPUT] : Backup the SRAM data on the HD.
[N]
• The SRAM data is being backed up on the HD.
• Backup of the SRAM data on the HD has been completed.
• An error occurred while backing up the SRAM data on the HD.
Message
• The setting data is inadequate. (Alphabetic characters were set where
only numeric characters can be set, etc.)
• The data has not been set.
• Setting, erasing, etc., of the various data is prohibited, because the
DATA PROTECT key is validated.
• The application is running.
search engine
CHAPTER 4 APPENDICES
: Do not execute the operation.
: Do not format the NC memory.
: Do not quit the HMI.
: Do not backup the SRAM data on the HD.
IV – 23
Details
Details