Mitsubishi Electric MELDAS 600M Series Instruction Manual page 225

(2) Menus
Downloaded from ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Menu
The state (Machining, Program Search, Program
ON Start) indicated by the cursor is validated.
This menu can be used only when the cursor is at
Machining, Program Search or Program Start.
The state (Machining, Program Search, Program
OFF Start) indicated by the cursor is invalidated.
This menu can be used only when the cursor is at
Machining, Program Search or Program Start.
A random value can be set for each S, M, T and B
Manual data on the screen.
value
When a value is set, the selected S, M, T or B
function will be executed.
The device menu is displayed.
Designate the device of the program to be
Device
registered.
select
The selected device is registered as the device for
the program indicated by the cursor.
The program to be registered can be selected from
the file list. Select the file using the cursor displayed
From
in the list. When the INPUT key is pressed, the
list
selected file will be registered as the machining
program No.
List The file list for the device indicated by the cursor is
update
updated.
search engine
3. Setup Screens
Details
I – 210
Type Reference
(3) Registering a
machining program
C
for the pallet
(3) Registering a
machining program
C
for the pallet
1.5.1 Setting a
manual value
A
command
3.11.1 Standard
Pallet Registration
A screen
–
A
–
C